PROJECT PROFILE ON TISSUE PAPER

PROJECT PROFILE ON TISSUE PAPER:

          

Introduction

 Tissue paper is a lightweight paper or, light crepe paper. Tissue can be made both from virgin and recycled paper pulp. Key properties are strength, absorbency, basis weight, thickness, brightness, stretch, appearance and comfort.

Types of Tissue papers:

 Toilet paper, Wipes, Kitchen towels, Handkerchiefs, Facial tissue, House hold towels, Napkins. Tissue papers are made of- one or several plies, each ply of one or several layers, manufactured as sheets or rolls, folded or unfolded, embossed or un embossed with or without lamination, printed or unprinted.

Raw Material specification: 

Products                      Specification

Facial tissue               12.5 to 13 & 14 GSM 

Toilet Tissue              14 to 22 GSM 

Napkin                       15 to 24 GSM 

Towel Grade              19 to 42 GSM

Manufacturing Method 

Tissue paper are manufactured by using automatic conversion machine. Paper rolls are obtained from the paper mill feed into the machine to get required sizes .The Standard sizes are 9X9, 11X11and 12X12.And one machine only one sizes may be possible to manufacture/convert. And online printing also be done by using flexo printing device. 

                          Manufacture of Tissue Paper Processing

 

                                    Raw material slitting

                                          |

                                    Printing,

                                          |

                                    Embossing,

                                          | 

                                    Folding, 

                                          |

                                    Counting,

                                          |

                                    Packing,

Energy Conservation: 

 General precautions for saving electricity are followed by the unit by providing energy meter. These products are low energy consumption. Thus considerable energy could be saved during manufacturing activities. 

Basis and presumption of the project: 

i. The process of manufacture is on the basis of Double shift eight hours per shift with three hundred working days in a year. 

ii. To achieve full plant capacity it requires three month trial production 

iii. Labor and wages mentioned in profile are as per prevailing local rates. 

iv. Interest rate at 12.5% considered in the project 

v. However the rate of interest may be varying while implementing project. 

vi. Working capital requirements taken only one month recurring expenditure, however it may be taken up to 3 month recurring expenditure 

vii. The Promoter contribution will be 5% of the total project cost applicable under the PMEGP Schemes. (Special category)

FULL DETAILED PROJECT REPORT:

  CLICK~~> Tissue Paper Project Report Pdf <~~

Blog Founder:

Ajith Kumar